
দোষী সাব্যস্ত করার প্রক্রিয়া শুরু হয়েছে.
Air/Oil Separator KV360-003
সংকুচন করার যোগ্য সামগ্রী
বায়ু সংক্ষেপক ফিল্টার উপাদান
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as
আমাদের দল ভাড়া, সামঞ্জস্য এবং সরবরাহের জন্য আদেশ নিশ্চিত করেছে।.
নিশ্চিত নির্বাচনের জন্য নির্ধারিত বর্ণনা।.
যন্ত্রপাতির ম্যানুয়াল অথবা মূল নথিপত্রের নিশ্চিতকরণ, নিশ্চিত করুন।.
| OEM / ক্রস রেফারেন্স | 6.1965.0, 6.2013.0, 6.4024.0,49 000 50 321, 49 000 51 321, 49 004 52 101, 49 004 52 102, 49 004 53 102,P52-5203, P53-0757P52-5203 , P53-0757 |
|---|---|
| উচ্চতা | 450 mm |
| বাইরের ব্যাস | ২৭৫ মিলিমিটার |
| ইনার ডিয়ামিটার | ২.১৯ মিলিমিটার |
| ওজন | ৮.৩ কেজি |
| অস্ট্রেলিয়া | ৩২৮ মিলিমিটার |
| পরিস্রাবণ রেটিং | 0.1 মিমি |
KV360-003 is Built-in flange type air/oil separator element. This product is specially designed for oil-injected screw air compressors. As an OEM equivalent replacement element of the same quality as original filters of many mainstream brands, it is used to efficiently separate lubricating oil mist from compressed air, ensure the clean operation of the pneumatic system and reduce oil consumption.
Structural and Material Features
• High-quality filter media.
The interior is wound with multiple layers of uniformly graded borosilicate glass microfiber. It features high dust holding capacity and low initial pressure drop (approximately 0.14–0.20 bar), which helps reduce the energy consumption of the air compressor.
• High-strength support structure.
Equipped with high-strength, rust-proof perforated inner and outer metal support screens and galvanized end caps. It can withstand pressure differential shocks up to 5 bar (70 psi) without collapse or deformation.
• Non-porous flange sealing design.
The top flange adopts a non-porous flat flange structure (outer diameter approx. 324–328 mm, total height approx. 450 mm), which is sealed by direct compression against the top cover of the oil-gas separation tank. Two oil-resistant sealing gaskets with conductive metal pins are usually supplied with the unit. They can naturally dissipate static electricity generated during filter operation after installation to ensure equipment safety.
নোট ইনস্টল করা হয়েছে
অপসারণ ও অপসারণের পূর্বে সিস্টেম বন্ধ করা হবে। ইনস্টলেশনের পূর্বে দূরত্ব ও মুদ্রাঙ্কন নিশ্চিত করুন।.
বার্তা তালিকা
চাপ কমতে অথবা রক্ষণাবেক্ষণের সিডিউল অনুযায়ী প্রতিস্থাপন করুন। ছিদ্রের জন্য গবেষণা এবং ক্ষতি সীল.
সাজানোর পূর্বে
মিডিয়া, গতি, তাপমাত্রা, তাপমাত্রা, সংযোগ এবং উপলব্ধ ইনস্টলেশন স্থান।.
ক্রস রেফারেন্স
এই পণ্যের সঙ্গে সম্পর্কযুক্ত রেফারেন্স আমাদের সাথে যোগাযোগ করুন যদি আপনি ক্রস-রেক্রয় নাম্বার নিশ্চিত করেন।.
বিতরণ সংক্রান্ত বিকল্প
জাহাজ অথবা সার্ভিস পয়েন্ট পিকআপ. আমাদের দল গন্তব্য, ওজন এবং গুরুত্বপূর্ণ সময়ের উপর ভিত্তি করে সবচেয়ে সেরা ব্যবস্থাটি নিশ্চিত করেছে।.
জমা দেওয়ার পূর্বে নিশ্চিত করা হবে
তদন্ত করার পর, আমরা তথ্য যাচাই, দাম এবং সরবরাহের ব্যবস্থা নিশ্চিত করি।.
চলমান সহায়তা
সঠিক তথ্য প্রদান, ইনস্টলেশন অথবা গুণগত মান সংক্রান্ত প্রশ্নের উত্তর প্রদান করুন।.
মাইরিএই পণ্যের জন্য একটি অনুসন্ধান পাঠান
Send your requirements for KV360-003 and our selection team will confirm compatibility, price and lead time.
নির্বাচনের সামগ্রী
Need help confirming KV360-003 or comparing it with another reference? Use these selection resources before ordering.



