
দোষী সাব্যস্ত করার প্রক্রিয়া শুরু হয়েছে.
এয়ার/ ওলতি বিভাজক ২৯০৯০৯০৫০০
সংকুচন করার যোগ্য সামগ্রী
বায়ু সংক্ষেপক ফিল্টার উপাদান
Oil application for sealing gaskets: Before installation, apply a thin layer of air compressor lubricating oil to the surface of the new O-ring or flange sealing gasket. This ensures smooth tightening
আমাদের দল ভাড়া, সামঞ্জস্য এবং সরবরাহের জন্য আদেশ নিশ্চিত করেছে।.
নিশ্চিত নির্বাচনের জন্য নির্ধারিত বর্ণনা।.
যন্ত্রপাতির ম্যানুয়াল অথবা মূল নথিপত্রের নিশ্চিতকরণ, নিশ্চিত করুন।.
| উচ্চতা | ৪৫০মিমি |
|---|---|
| OEM / ক্রস রেফারেন্স | 1623051599,1623051500 |
| বাইরের ব্যাস | ৩৯৯ মিলিমিটার |
| ভিতরের ব্যাস | ৩১৫ মিলিমিটার |
| ওজন | ১৭.০৩ কেজি |
| পরিস্রাবণের নির্ভুলতা | 0.1 মিমি |
গ্যাস বন্ধের জন্য তেল সরবরাহের আবেদন: ইনস্টলেশনের আগে, বাতাসে একটি পাতলা স্তর প্রয়োগ করা হয়। এর ফলে বায়ুদূষণ এবং ব্যাপক উন্নতির দিকে ধাবিত হতে থাকে, যা কিনা কম্প্রেশনের সময়ে গ্যাসকে সরিয়ে ফেলতে পারে বা সেখান থেকে সরে যেতে পারে।.
কোভেন্টেজ
• আল্ট্রা-বিস্তৃত বিশুদ্ধ (বিস্মৃতি):
The filter element adopts multi-layer composite superfine glass fiber inside, which can efficiently coalesce micron and submicron oil mist droplets. After separation, the oil content of discharged compressed air can be reduced to an extremely low range of 1–3 ppm, effectively preventing pipeline contamination and protecting expensive downstream air-consuming equipment and pneumatic components.
• Remarkable energy saving and consumption reduction (low pressure drop design):
The product features excellent air permeability with an initial resistance below 0.02 MPa. It maintains an extremely low pressure drop throughout its service life. This means the air compressor motor does not need extra work to overcome resistance, thereby greatly cutting the enterprise's electricity cost during long-term operation.
• Long-lasting pressure resistance and safety protection:
High-strength corrosion-resistant alloy steel is used for the frame and flange, combined with a patented anti-static conductive strip design. It can withstand abnormal pressure differential impacts up to 5 bar to prevent the filter element from collapsing, and can timely discharge static electricity generated by friction of high-speed airflow, completely eliminating the risk of combustion and explosion caused by static sparks inside the machine.
• Original one-stop kit (all-in-one package):
Supplied in the form of a maintenance kit. In addition to the main filter element, it is fully equipped with fluororubber O-rings and special high-temperature resistant sealing gaskets. It ensures that peripheral sealing parts can be replaced synchronously during each maintenance to achieve 100% air tightness and eliminate risks of air and oil leakage.
নোট ইনস্টল করা হয়েছে
Removal of the Old Oil Separator Core Remove external pipelines: Carefully detach the oil return pipe on the oil-gas barrel cover with a wrench (take care not to lose the sealing copper washer at the pipe end fitting). Remove control pipelines (such as the pipeline of the pressure maintaining valve, sensor cables and other components hindering disassembly). Remove barrel cover bolts: Use a socket wrench to loosen and remove the fastening bolts on the top cover of the oil-gas barrel one by one in a diagonal cross sequence. Take out the old oil separator: Lift the barrel cover vertically upward and remove it. Take out the old oil-gas separator core and the old sealing gaskets on both sides of the flange. Cleaning and inspection: Wipe the flange surface of the oil-gas barrel and the sealing groove of the top cover clean with a clean lint-free cloth (do not let foreign matter fall into the oil barrel). Pull out the copper tube of the oil return pipe, check whether the pipe end is worn and whether the beveled opening is unobstructed, and clean the oil return check valve.
বার্তা তালিকা
Differential Pressure Alarm (Replace Immediately): When the control panel shows that the differential pressure across the oil separator element reaches 0.8 ~ 1.0 bar (approximately 12 ~ 15 psi), it indicates that the separator is severely clogged and must be replaced immediately; otherwise, it will cause motor overload and a sharp increase in energy consumption. Air filter element: Replace every 2,000 ~ 4,000 hours (traps dust and prevents the oil separator from premature clogging). • Oil filter element: Replace every 2,000 ~ 4,000 hours (removes impurities in oil to avoid screw rotor scratching and oil separator blockage). • Lubricating oil: Replace together with the oil separator every 4,000 or 8,000 hours (depending on whether semi-synthetic or fully synthetic oil is used).
সাজানোর পূর্বে
মিডিয়া, গতি, তাপমাত্রা, তাপমাত্রা, সংযোগ এবং উপলব্ধ ইনস্টলেশন স্থান।.
ক্রস রেফারেন্স
এই পণ্যের সঙ্গে সম্পর্কযুক্ত রেফারেন্স আমাদের সাথে যোগাযোগ করুন যদি আপনি ক্রস-রেক্রয় নাম্বার নিশ্চিত করেন।.
বিতরণ সংক্রান্ত বিকল্প
জাহাজ অথবা সার্ভিস পয়েন্ট পিকআপ. আমাদের দল গন্তব্য, ওজন এবং গুরুত্বপূর্ণ সময়ের উপর ভিত্তি করে সবচেয়ে সেরা ব্যবস্থাটি নিশ্চিত করেছে।.
জমা দেওয়ার পূর্বে নিশ্চিত করা হবে
তদন্ত করার পর, আমরা তথ্য যাচাই, দাম এবং সরবরাহের ব্যবস্থা নিশ্চিত করি।.
চলমান সহায়তা
সঠিক তথ্য প্রদান, ইনস্টলেশন অথবা গুণগত মান সংক্রান্ত প্রশ্নের উত্তর প্রদান করুন।.
মাইরিএই পণ্যের জন্য একটি অনুসন্ধান পাঠান
Send your requirements for 2906095500 and our selection team will confirm compatibility, price and lead time.
নির্বাচনের সামগ্রী
Need help confirming 2906095500 or comparing it with another reference? Use these selection resources before ordering.



